Need some info. Installing a set of tip over bars and need new hardware. I need to know the length of the motor mount bolts and the spacers for each side. If anyone has this info it'd be great.

No one?

you could call the man..
or,

https://www.murphskits.com/

https://www.murphskits.com/product_info.php?cPath=1_90&products_id=439&osCsid=oUU6-BEdeIoTrx5rRuvb81

http://forum.cog-online.org/murph's-kits/hardware-kit-for-front-tip-over-bars/

I've tried contacting him before, no answer.

Sharing this for anyone else who cannot find it.
Upper motor mount replacement bolts are 3/8" x 5", spacers are 1 3/8" on one side and 7/8" on the other.
I'll share the info for the lowers if I find it. What I have found is that the spacers for the lowers are 5/8", but I don't have the bolt spec..yet.