« Reply #6 on: February 07, 2020, 08:26:48 PM »
Thanks for all the input. I’ll schedule to have the fluid changed out. See if that helps smooth out the brakes, and provide feedback. I’d do it myself but never have tried in on an abs system before.
I was nervous the first time I did it and it was much easier than I expected it to be, especially with all the horror stories about people getting air in the lines (perhaps I was just lucky). I used a "motion pro." Considering your other post- it is about a hundred times easier than replacing that leaking cam sensor O-ring (and several hundred times easier than a valve adjustment)
Also, I would at least clean the rotors with brake cleaner and a scrubby or something. That is about as easy a start as possible.
Logged
Shoodaben (was Guhl) Mountain Runner ECU flash, Canyon Cages front/rear, Helibars risers, Phil's wedges, Grip Puppies, Sargent World seat-low & heated & pod, Muzzy lowering links, Soupy's stand, Nautilus air horn, Admore lightbar, Ronnie's highway pegs, front running lights, all LED, helmet locks, RAM Xgrip, Sena SMH10, Throttle Tamer, MRA X-Creen, BearingUp Shifter, PR4-GT, Scorpion EXO-T1200,etc