They aren't on the site yet for now I'll take a few orders via paypal.
For the order it is
Stainless shim, bearing, bushing,bearing, bushing,bearing and stainless shim.
When you have the shifter off the bike its easy to knock out the plastic bushing. I opened my vice jaws wide enough for the bearing to pass through and knocked it out using a 1/2in bolt and small hammer.
After that I took the first bearing, and using the vise, pushed it in from one side. Remove the shifter with its one new bearing, and using the bolt place the rest of the assembly in the hole from the opposite end. The bearing you have installed will act as a guide for the rest. Place a socket on the side that has the new bearingso the bolt can pass through, push on the bolt head with the vise, and when you feel it get "snug" your there..
Hows that?
I've got a list of "have too" projects today but hope I make it to havingthis listed at the site tonight..till then paypal will work. I have the parts to sent out three shifters complete and about 13 more bearing kits..
Let me know
Murph
COG 2769
Industry Member