Any body live near Wilson at I95 and US264 that could transport me to a little bit better location until my wife gets here in 6 hours?  Its hot.

Call me
Frank

Got home a little after midnight.  Has hole big enough to put your fist in.  Anybody got a good motor in the Northern VA region?

  You're only 7 hrs from Pinwall Cycle ( http://pinwallcycle.com ) just south of Cleveland. Usually has 3 or 4 of these motors available.
Buddy of mine got a 30k mile motor from them for his '99 C10 & I believe he only pd $300....  Runs great, cams looked awesome too!

Thanks for the info, I looked into them.  I found one in Hartford, CT i'm picking up on Saturday.  Low mileage, good rods, no leaks, and a great price from a forum member.

Sorry I'm so late to this post, I live in Chapel Hill and work in Durham. Glad to hear you got hame safely, good luck with the bike.

I have a complete 2009 C-14 engine with all attachments for sale, 3200 miles, $1,000.00 plus freight from Orlando, Fl

Take PayPal

Ninjawarrior

I don't think that fits in a C10 frame...

I don't think that fits in a C10 frame...

There's a few folks around that may take that as a challenge...

I wonder if it could be made to fit?  Actually last night I put oil and coolant in the replacement motor.  No drops on the floor this morning.  Hopefully I will finish it tonight.  I had a lot of family stuff slow me up.  Wife's ankle surgery and everything leading up to it for one.

By the way, that does sound like a great deal on a motor.

Call this post closed.  I rode the bike to work today.

Call this post closed.  I rode the bike to work today.

Call this post closed.  I rode the bike to work today.

Much quicker than I would have been able to get it done.  So everything worked out with the motor from the parts bike?

Much quicker than I would have been able to get it done.  So everything worked out with the motor from the parts bike?

Actually, it's not all good, but now I have me a whole bunch of extra parts.  The motor is not good in it's current condition.  I has a loud ticking coming from the #1 side.  I replaced the automatic CCT with my manual one and rechecked the valves to make sure it wasn't them - no change.  I'm thinking it is piston slap or a bad rocker assembly.  It seems to be coming right from just below where the upper cam gears are.  Donna just had right foot surgery so she can't drive and I am chafeur right now so I don't ride much.  I'm going to send SISF an email with a few questions before I look for a new motor, perhaps its salvagable.  Maybe swapping a piston and rod is feasible if that is all it is.  I think the jugs come out of these too?  If I need another one, i'll do it over the winter.  I still did the ACC at MCB Quantico with it and it didn't blow up.

Actually, it's not all good, but now I have me a whole bunch of extra parts.  The motor is not good in it's current condition.  I has a loud ticking coming from the #1 side.  I replaced the automatic CCT with my manual one and rechecked the valves to make sure it wasn't them - no change.  I'm thinking it is piston slap or a bad rocker assembly.  It seems to be coming right from just below where the upper cam gears are.  Donna just had right foot surgery so she can't drive and I am chafeur right now so I don't ride much.  I'm going to send SISF an email with a few questions before I look for a new motor, perhaps its salvagable.  Maybe swapping a piston and rod is feasible if that is all it is.  I think the jugs come out of these too?  If I need another one, i'll do it over the winter.  I still did the ACC at MCB Quantico with it and it didn't blow up.

Do not expect a quick reply from SiSF. He and his family are on a two week fishing trip on an island near St Augustine, FL. No email, limited phone. Back in a week or so. He might have a few things to catch up on upon his return to civilization.

Good Luck with the engine. Bummer.

Do not expect a quick reply from SiSF. He and his family are on a two week fishing trip on an island near St Augustine, FL. No email, limited phone. Back in a week or so. He might have a few things to catch up on upon his return to civilization.

Thanks, that's what I thought I heard.  This would be a winter project if it gets that far.  So, anybody know of any GOOD engines within a few hours of Northern VA (besides the usual Pinwall and a few others)?  Keep your eyes open please 

You see this? there's and engine up in Baltmore http://baltimore.craigslist.org/mcy/3113910795.html

Thanks.  I've seen that one, its been posted for two months.  Thats a pretty high starting price, and i'm not in a hurry yet.  I just don't want a good low price one to slip by.