Do they come with mounting brackets or do they mount with 2 way tape? In 1 of the video's it looks like 2 way tape
I saw this on them:
Technical Stuff: BikeVis Bullets feature a simple 2 wire hook up, so anyone qualified to connect motorycle wiring can easily add a pair (or two, or three) so they come on with the ignition switch. No relays, extra switches or complicated wiring required. Service life is 50,000 hours or roughly 6 years of non-stop riding. (Just imagine, at 40 miles per hour BikeVis Bullets would last 2 million miles!) On a side note the Wiring comes out of the self-adhesive bottom surface, so depending on where you want to mount the Bullets, you may need to drill a tiny hole in the mounting surface for the wiring to pass through. Alternatively you can mount the Bullets on the trailing edge of a flat surface and run the wire behind the fairing, fender, etc. Either way, BikeVis Bullets are a fast, brilliant, and inexpensive way to make your bike stand out on the road, day or night. Both still and video photography do not do justice to the intensity of light that is produced by these rugged LED bullets. It's hard to describe just how bright they are in person, until you've seen them yourself.
