« previous next »
Pages: 1 2 »   Go Down

Author Topic: Installed - Fuzeblock, Gerbings, another Powerlet port...  (Read 15342 times)

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Installed - Fuzeblock, Gerbings, another Powerlet port...
« on: October 02, 2012, 10:14:12 PM »
Back in the shop today getting ready for winter riding...  :)
 


 

Adding a Fuzeblock to wire some old and new accessories into... Opted to lose the tool kit spot and will just put those tools in my Corbin Smuggler.
 
http://www.fuzeblocks.com/
 


 

 
 
Went with the permanent mount Gerbings dual controller...
 
http://gerbing.com/Products/tempcontrols.php

Mounting the dial controls and LED indicator lights up front left, see the blue tape markings were they'll go (and relocating my heated grips switch)...
 



 
Went with 2 of the panel mount ports, see blue tape markings were they'll go left side by the Concours14 badge...
 
http://gerbing.com/Products/accessories.php
 


 
 

Also adding another Powerlet port on the left side of the dash where that blank plug is...
 
Got it from Advanced Sport Touring, great company to do business with, I highly recommend them!  :thumbs:
 
http://www.advancedsporttouring.com/product_p/c14-pkt-046-12.htm
 
 
 
I said to my mechanic, hmmm... maybe we should have done this the other week while we had it all apart anyways eh... He just laughed and said that's just not how you roll Jay, I'm sure you'll bring it back in a couple more weeks for something else too...   ;D
 
 
« Last Edit: October 04, 2012, 06:42:40 PM by ZG »
Logged

Son of Pappy

  • Guest
Re: ZG back under the knife - Fuzeblock, Gerbings, and another Powerlet port...
« Reply #1 on: October 02, 2012, 10:59:03 PM »
How is he with FI?
Logged

Offline gPink

  • Arena
  • Hero Member
  • *****
  • Posts: 5686
  • Country: cn
  • MMVIII C XIV
Re: ZG back under the knife - Fuzeblock, Gerbings, and another Powerlet port...
« Reply #2 on: October 03, 2012, 04:01:12 AM »
Jay, if you ever sell the bike you're going to have to write a supplement to the Kaw shop manual.
Logged

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: ZG back under the knife - Fuzeblock, Gerbings, and another Powerlet port...
« Reply #3 on: October 03, 2012, 08:56:23 AM »
Quote from: Son of Pappy on October 02, 2012, 10:59:03 PM
How is he with FI?

FI? Fuel Injection? I don't get it Chet... ??  ???
Logged

Son of Pappy

  • Guest
Re: ZG back under the knife - Fuzeblock, Gerbings, and another Powerlet port...
« Reply #4 on: October 03, 2012, 09:11:33 AM »
Quote from: ZG on October 03, 2012, 08:56:23 AM

FI? Fuel Injection? I don't get it Chet... ??  ???
Yup, ZX TBs bro :)  May as well while he has it on the lift :P
Logged

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: ZG back under the knife - Fuzeblock, Gerbings, and another Powerlet port...
« Reply #5 on: October 03, 2012, 11:29:40 AM »
Quote from: Son of Pappy on October 03, 2012, 09:11:33 AM
Yup, ZX TBs bro :)  May as well while he has it on the lift :P

Oh, got it, that makes more sense now, sorry it's Wednesday. :( ;) 
Logged

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: ZG back under the knife - Fuzeblock, Gerbings, and another Powerlet port...
« Reply #6 on: October 03, 2012, 02:14:14 PM »
Side panel ports mounted...  :)
 

 

Logged

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: ZG back under the knife - Fuzeblock, Gerbings, and another Powerlet port...
« Reply #7 on: October 03, 2012, 08:25:05 PM »
Front Gerbings controls and heated grips switch relocated, additional powerlet port mounted, got her back about an hour ago but it's too dark for better final pics, I'll try to take some tomorrow...
 

 

 
Logged

Offline Gumby

  • Arena
  • Sr. Member
  • ****
  • Posts: 1320
  • Country: us
  • Black 2011
Re: ZG back under the knife - Fuzeblock, Gerbings, and another Powerlet port...
« Reply #8 on: October 04, 2012, 08:37:43 AM »
Quote from: ZG on October 03, 2012, 08:25:05 PM
I'll try to take some tomorrow...
:popcorn: :popcorn:

Not sure if I've seen enough pictures of your bike.  ::)

 :rotflmao:
Logged

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: ZG back under the knife - Fuzeblock, Gerbings, and another Powerlet port...
« Reply #9 on: October 04, 2012, 10:36:59 AM »
Quote from: Tom V on October 04, 2012, 08:37:43 AM
:popcorn: :popcorn:

Not sure if I've seen enough pictures of your bike.  ::)

 :rotflmao:

 ;D ;D ;D
 
Logged

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: ZG back under the knife - Fuzeblock, Gerbings, and another Powerlet port...
« Reply #10 on: October 04, 2012, 04:55:25 PM »
Final product pics, came out pretty clean IMO, used the heated gear on my ride into work this morning and everything worked like a charm!  :thumbs:
 

 

 

 

 

 

 

 

 
Logged

Offline wildnphx

  • Arena
  • Full Member
  • ***
  • Posts: 432
Re: ZG back under the knife - Fuzeblock, Gerbings, and another Powerlet port...
« Reply #11 on: October 04, 2012, 05:34:22 PM »
I call dibs when you sell the bike!!  :)
Logged

Offline Cuda

  • Full Member
  • ***
  • Posts: 782
  • Country: us
Re: ZG back under the knife - Fuzeblock, Gerbings, and another Powerlet port...
« Reply #12 on: October 04, 2012, 05:43:27 PM »
Has not been below 70 degrees in over 5 months,
 I better get working on a seat heater so my ass can sweat year round ;)
South Florida.
Logged
Old and SLOW                   COG 11405
Gods waiting room Naples
2011 Atomic  Silver

Offline C1xRider

  • Full Member
  • ***
  • Posts: 836
  • Country: us
  • Where did all the posts go?!??
Re: ZG back under the knife - Fuzeblock, Gerbings, and another Powerlet port...
« Reply #13 on: October 04, 2012, 07:53:23 PM »
Quote from: Cuda on October 04, 2012, 05:43:27 PM
Has not been below 70 degrees in over 5 months,
 I better get working on a seat heater so my ass can sweat year round ;)
South Florida.

Yes, then ride over here to test it out.  It was forecasted to be in the low 30's in the outlying areas this morning.  Haven't checked if it really was though.
Logged
--------------------   BACK UP YOUR DISKS PEOPLE!! -------------------------------
2012 K1600 GTL 8), 2010 C14 ABS, 2002 HD FXSTDI, 2000 XT350, 1998 C10, 1983 V65 Magna, 1978 HD SX250

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: ZG back under the knife - Fuzeblock, Gerbings, and another Powerlet port...
« Reply #14 on: October 04, 2012, 07:59:40 PM »
Quote from: Cuda on October 04, 2012, 05:43:27 PM
Has not been below 70 degrees in over 5 months,
 I better get working on a seat heater so my ass can sweat year round ;)
South Florida.

I'll take cooler temps and roads with some actually turns and elevation changes to them anyday over flat Florida bro...  ;D ;) :chugbeer:
Logged

Offline stevewfl

  • Arena
  • Hero Member
  • *****
  • Posts: 4268
  • Country: 00
Re: Installed - Fuzeblock, Gerbings, another Powerlet port...
« Reply #15 on: October 04, 2012, 08:18:45 PM »
NICE!!!
Logged
“The World is a book, and those who do not travel read only a page.” St. Augustine

Offline OCK913

  • Arena
  • Full Member
  • ***
  • Posts: 363
  • Country: us
    • The Orlando Riders Club
Re: Installed - Fuzeblock, Gerbings, another Powerlet port...
« Reply #16 on: October 05, 2012, 03:20:43 AM »
You would think that after 4 grand worth of Ohlins and powder coating less than a month ago, there would be at least a slight break before the farkling began again.  Either Mrs. ZG is the most unbelievably loving, nuturing, generous woman on the planet, or ........... she has no clue what he is doing and when she finds out there will be a smackdown of epic proportion coming.
Logged
.............................................................
            2009 Kawasaki C14 - Black

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: Installed - Fuzeblock, Gerbings, another Powerlet port...
« Reply #17 on: October 05, 2012, 11:21:29 AM »
Quote from: OCK913 on October 05, 2012, 03:20:43 AM
You would think that after 4 grand worth of Ohlins and powder coating less than a month ago, there would be at least a slight break before the farkling began again.  Either Mrs. ZG is the most unbelievably loving, nuturing, generous woman on the planet, or ........... she has no clue what he is doing and when she finds out there will be a smackdown of epic proportion coming.

 :rotflmao:   Door # 2 OCK...  ;) :-X ;D
Logged

Son of Pappy

  • Guest
Re: Installed - Fuzeblock, Gerbings, another Powerlet port...
« Reply #18 on: October 05, 2012, 11:24:01 AM »
Quote from: ZG on October 05, 2012, 11:21:29 AM

 :rotflmao:   Door # 2 OCK...  ;) :-X ;D
Well, your fav color is black, how do you feel about,,,,, wait for it, wait, wait some more, still waiting----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------blackmail? :o :o ;)
Logged

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: Installed - Fuzeblock, Gerbings, another Powerlet port...
« Reply #19 on: October 05, 2012, 11:35:22 AM »
Quote from: Son of Pappy on October 05, 2012, 11:24:01 AM
blackmail? :o :o ;)

 ::)   No beer for you Chet... 
 
Logged
Pages: 1 2 »   Go Up
« previous next »