URLS / Info on C14 Bar Risers:
++++++++++++++++++++++++++++
Amotostuff
(GenMar): Handlebar risers
Code: K406
Price: $98.96
Shipping Weight: 3.00 pounds
Quantity On Hand: 1
Quantity in Basket: None
The risers are placed between the fork crown and the handlebars to raise the bars up 2" (51mm) and back 1-1/8" (28.5mm). This will help to relieve wrist and neck pain on long rides. Requires minimal re-routing of some control cables, wiring, or hoses. - K406
http://www.amotostuff.com/concours14_hand_cont/K406.html$98.86
Murphs: Bar Risers
This set gives 3/4" pull back and 1-3/8" rise. For comparison, we have the stock measurement from the top of the mirrors to the bars at 12-1/4", while the height of the bar end is 41-7/8" on center from the ground. With the KB risers installed, the distance back is now 13", with a height of 43-1/4". The riser blocks themselves are 1-5/8" thick.
The KB risers come with the same grade stainless mounting bolts as stock, 4 bolts to use with, or to temporarily cover, the accessory mounting holes, and six allen head covers, just in case you want a little change of pace.
http://www.murphskits.com/catalog/product_info.php?cPath=130_133&products_id=282$92
Motorcycle Larry Handlebar Risers: RISER BLOCKS
The MCL riser blocks raise your handle bars up 1 3/4" (44 mm) and back 3/4" (19.5 mm) . Retains: stock handlebars, cables, and hydraulic lines, bar angles do not change. The MCL riser blocks are machined out of 6061 T6 billet aluminum then powder coated and come with extra long stainless mounting screws.
You can mount either one of each of the above accessories or two of the same kind on each block. When ordering the MCLPOD power bracket note in the attributes below if you want to mount it on the right or left bar riser.
The new MCL Bar Risers Offer:
1, 44mm (1 ¾) increased handlebar height 19.5 mm (3/4) rear offset to reduce reach to grips
2, Machined in house of aircraft grade aluminum, then stardust silver powder coated, sold
direct with no dealer middleman another MCL exclusive
3, Raises the bars up and out of your field of vision in your mirrors
4, Options include a Ram Ball mount block that will fit on right or left side or put
one on each side and a Powerlet socket bracket a MCL original to hold a 12 volt
Powerlet plug for your electronics or tank bag.
5, Maximum height without changing cables or hydraulic lines
(Ram and power are screw on to riser at extra cost)
http://www.motorcyclelarry.com/index.php?main_page=product_info&products_id=169$89.98
Premier
(HeliBar): Handlebar risers
HeliBars Handlebar Risers Kawasaki C14 ('08-'11)
(2" taller, 3/4" rearward. Includes: Powerlet Socket & Ram Mount Ball. Color: Aluminum)
51 mm (2 inch) increased handlebar height
19 mm (3/4 inch) rear offset to reduce reach to grips
•Removes bar and hand distractions in the rearview mirrors due to the bars
and controls being moved up and out of the field of view
•Left side features the Powerlet® socket for a convenient power source
•Right side bar adapter includes a vertically threaded boss with a 1” Ram Mount® Ball. This single feature simplifies and reduces the cost of mounting a GPS or other electronic device. Road testing dictated this ideal ball mount location which allows easy access to the tank top storage compartment lid. We also recommend a Ram Mount® 6” double socket extension arm, which will place your GPS at the ideal height
•Uses all stock cables and hydraulic lines
•Optional Wiring Harness not included.
•Part # 150-0034. This wiring harness is built by Powerlet specifically for these risers. Everything you need to wire the socket is included & the length is assured to be the correct distance from the socket to the battery.
https://www.premiercycleaccessories.com/HeliBars_Handlebar_Risers_Kawasaki_C14_08_10_p/helihr04042.htmhttp://www.helibars.com/product/08-09-concours14-1400gtr-tour-performance-hr-adapters-0$160
ProjekD Handlebar risers: 38 MM ~ 1½"
Handle Bar Risers for Kawasaki GTR1400 and Concours 14 CNC Machined from solid billet aluminum. Fits on 2008 to 2011 Model bikes. This accessory will raise the position of the handle bars by 38 mm ~ 1½", providing a more relaxed riding position. Silver anodized finish blends in with the handle bar color of the GTR1400 / Concours 14.
http://projektd.com/product_info.php?products_id=86$80
Twisted Throttle
(GenMar) Handlebar risers
The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/2" (38mm) and back 7/8" (22mm). This will help to relieve wrist and neck pain on long rides. Requires minimal re-routing of some control cables, wiring, or hoses.
Code: K405
Price: $89.96
Shipping Weight: 3.00 pounds
http://www.twistedthrottle.com/trade/productview/4649/218/$99.95