The C10, aka Kawasaki Concours - The Original > Accessories and Modifications - C10
GPZ900 handlebars
Chrome Megaphone:
Has anyone checked to see if this is a bolt-on and clears the fatter C10 tank? Since I'm putting on a GPZ fairing it should clear that.
connie_rider:
Don't know the answer, but you might consider a set of the lower 86-86 Connie bars as i know they clear the tank and are readily available.
Ride safe, Ted
Chrome Megaphone:
Thanks, the bike is an 86 but wanted it just a bit lower as I don't anticipate any long trips. Was also thinking about converting to a tubular bar.
I bought a set of ZG1200 fork springs as an experiment, they're definitely thicker and drop in. Will give a report on that once the bike is rolling.
Chrome Megaphone:
The ZX11 rear shock is also a bolt in I found.
connie_rider:
You will have to install both on the bike, and check the sag to determine if the spring force is anywhere near correct.
Will have to see if the rear shock has decent damping too.
I agree, the ZG-1200 spring should be stiffer as that bike is heavier.
But the ZX-11 is lighter and they may be too light.
Ride safe, Ted
Navigation
[0] Message Index
[#] Next page
Go to full version