Just washed up and uploaded some photos of the plenum I made today.
I am not going to upload photos here because the site cant handle high res photos. I will post links to them at the end of this post.
I got a piece of 3 in pipe to use as the plenum. It was easy to work with and did not take up that much room. Drilled the holes for the runners and I surprised myself and didnt mess it up.
Will mount the throttle body to the top of it. Put the temperature sensor inside and the vacuum sensor wherever there is room. I also want to put a fuel presser regulator somewhere near here but as it is shaping up there is just enough room for a filter on top of the throttle body unless I mount it on the side.
I am pleased with he way things are fitting together. I ordered the fuel injector bungs and throttle body so I am at a stand still until they arrive. I will use the time to study the relationships between temperature, rpm, load...etc
photos are here.
https://fuelinjectorproject.shutterfly.com/pictures/28#28