Well I decided to hook up the screaming banshee and FZ1 fuse block today. Could not really locate the horn in a desirable place adjacent to the stock horn. There does not appear to be enough clearance in any direction especially with front fender movement. I initially thought to simply remove the stock horn from its mount, slip the shaft of the stock horn through the hole on the Banshee bracket and remount the whole unit....uh nope. The holes do not allow both horns to be mounted on the same bracket ( too close). So I thought that I would simply re-drill the Banshee bracket but there does not seem to be enough clearance in the space above the fender. Looking at the Banshee web site under installation, the one Banshee unit mounted next to the stock horn seems somewhat different from the Plug and Play unit I have. Has anyone tried to mount this horn yet? I will look for another place to mount it next week, or maybe call Peter and see if he has any suggestions for an appropriate mounting location. I also will be mounting a Banshee on my Gixxer, there seems to be a lot of room above the front fender on this bike.