I've decided I'm too young to be riding around on an old guy bike   

First off

2000 C10 Red
35k miles
SISF Carb service with 2 minute mod Power jet kit and overflow tubes
Bafflectomy
KN Air Filter
GIVI Mounting Kit
Murphs Fairing Screw Kit

Items bought but not installed:
T Cros Stick Coils and Shift Linkage
SISF Exhaust Cam Sprocket

  Okay The Not so good:
  Tires are worn out It needs new ones.
  The right side middle Fairing Has a couple cracks in it that I am currently repairing. Pics in the photobucket link.
   A couple of small scratches in the paint in various places. The pictures of those are in the link as well.
   There is a small crack in the outer shell of the tank right where the little rubber nub is on the right side fairing. The fit was a little tight and it must of rubbed hard enough to crack it. At least I assume so. It was on the bike when I bought it. Currently it has a little JB weld on it and doesn't leak.

  I'm looking to get $1800 but you are more than welcome to make an offer. Since I acquired the C14 I barely ride it and all it does is sit. I start it up once a month and ride it for about 15 min and that's it.

  2nd Connie

2010 C14 Blue w/ ABS and Traction Control
10k Miles This may change as I try to ride it every time it's warm enough to do so.

Mods:
Fender Extender
Radiator Guard
Leo Vince Slip on
Flies Removed
PCV With a FuelMoto Tune
Brand New PR3s with the 190/55 rear
BMC Air Filter
Grip Puppies
Throttlemiester
Tech Spec Snake Skin Pads on the Tank
Premier Cycle Acc Luggage rack W/ a Givi Mounting Kit Installed.

 The bad:
  A couple small Scratches on the lower left fairing from me trying to figure out how the jigsaw puzzle goes together as well as a couple small ones on the saddle bags that I don't have pictures of at the moment.

  I would like $10,000. Price is negotiable however.


  I also have a Givi 45L  Topcase that will fit either bike. If someone buys a bike I'd include it for an extra $200.

  Since I am notoriously absent minded I may update this post as I may have forgotten something.

 Link to C10 pictures
http://s944.photobucket.com/albums/ad287/ddcummins/C10/

 Link to C14 pictures
http://s944.photobucket.com/albums/ad287/ddcummins/C14/

 Thanks for looking.


 Edit: I was sure I put a location in here. Oh well. I'm in Western Nebraska. I also added that the C10 has an SISF Exhaust Cam sprocket as well that goes with it.

Location?

Please update the subject line with both C14 and C10, please.

Bump

Bump. If you don't like the price don't be afraid to give me your best offer. The worst I can do is say no. Well, I may point and laugh but honestly that's it.

 How cold is it out there for a fly in and ride out?

 Also can you be more specific about location so I can google mileage? Thanks

I'm in Big Springs, Ne. Closest Major airport would be Denver although there is a small one that charters flights in North Platte which is about 70 miles away. And it's hard to say what the weather would do. I would say 40*F or below and it's a good bet the wind will be blowing.

PM sent.  I'm interested, is there any way you can meet me in Lincoln or Grand Island?

I just sent you a pm.

Bump

Bumpity. Both of them are still here.

C-14 still available? Contact Phone? Thanks,

Bob

PM sent.

Old man bike? Sheesh, I'm not old. 

Sorry, If your old enough to be my parent then you've passed the "old" threshold to me   

I had a little oopsie yesterday that I though I had better take pictures and upload here. Evidently your supposed to stop leaning when the foot peg feeler hits the ground. Who knew?







And as always the rest of the C14 pictures are here: http://s944.photobucket.com/albums/ad287/ddcummins/C14/

Bump for Price Drop. I'll take $9500 for the C14 and $1800 for the C10.

Bumpity. I'm going to be in Denver this weekend with the C14 if anybody is interested in looking at it.