Kawasaki Concours Forum
Marketplace => For Sale => Topic started by: kzz1king on November 09, 2011, 05:31:38 PM
-
]I am parting out a complete, running 86.
WHAT'S GONE
Genmar Risers $45 shipped SOLD
Alternator SOLD
Antlers $3o shipped SOLD
Mirrors 45 each shipped LEFT ONE SOLD
Bags are solid, serviceable units. LEFT ONE SOLD
Rear luggage cover SOLD
Antler covers SOLD
Front Rotors SOLD
Right Peg SOLD
NEW OEM petcock 65 shipped CONUS
Fairing stay SOLD
Keeping jbox
WHATS LEFT
EVERYTING THAT ISN'T SOLD ;D ;D
Freshly rebuilt front calipers with new pads complete with master cylinder and fresh Dot5 $45 shipped CONUS (cheaper than rebuilding!)
Bars WITH Murphs grip heaters and grips and switch, wiring. WAS $49 Reduced to $ 39shipped CONUS(These are the low ones)
Almost New UNI air filter 17 shipped CONUS
Right Bag $70 plus shipping
Right Mirror $45 shipped SOLD
Lots of plastic
Flat seat with some tears
Instruments
Headlight assembly
Thanks For Looking
Wayne
Wayne
-
A list of your items for sale with prices including shipping would be helpful. :)
Here is what I 'm looking for:
1. Throttlemeister
2. Fender Extender
3. End Cap for bar end (little plastic cap that covers the end of handle bar :-\ )
4. Rifle Base
5. Auxiliary Lighting
db
-
Looking for:
J Box
battery box lid
Gen Mar Risers
Sent you a PM but forgot to put the risers on the list.
-
Looking for a wind screen to cut down for summer riding. Light scratches OK, minor or no stress cracks.
-
kzz1king, I will give you $35 for the Genmar risers, shipped to 72624 using Pay-Pal. Thanks JD
-
king,
I will offer $50 for the bars. Would like a set of spares.
Thanks!
saxman
-
I need a rear rotor. Is yours in good shape ?
How much shipped to Nevada.
-
I will try to check it out tonight when I get home and let you know the condition. I also have a aftermarket rotor with less than 6,000 miles on it. It is cast or whatever that will rust a little if left sitting. Made by EBC if I remember correctly.
Wayne
-
PM Sent
Thanks
Tj
-
any chance you have a set of Murphs knee savers?
-
any chance you have a set of Murphs knee savers?
Nope :)
-
E-mail sent about misc pieces.
-
E-mail sent about misc pieces.
Answered, thanks.
-
Still plenty left....about ALL of it ;D
-
Almost new air filter.
The risers above come with heated grips.
-
What kind of shape is the side stand in? Mine has some wear in the slot and allows the bike to lean too much and doesn't sit in the right position when in the up position.
-
It is in good shape Red but you reminded me that my newly purchased C10 may not be. If you are not in a hurry I will let you know after I finish tearing down the parts bike and getting my other on the bench for a look see.
Wayne
-
Hello, KZZ1;
I am interested in the right side plate holding the drivers peg. What would you ask for that, including shipping to Chicago? And do you know if that part will fit the '87 model?
BTW - do you accept paypal? Thanks for the opportunity.
Cheers,
-
PM sent. Thanks
Hello, KZZ1;
I am interested in the right side plate holding the drivers peg. What would you ask for that, including shipping to Chicago? And do you know if that part will fit the '87 model?
BTW - do you accept paypal? Thanks for the opportunity.
Cheers,
-
Thanks for the prompt response, KZZ1.
Looking forward to receiving the foot-peg base plate. I'm sure it'll fit.
Cheers,
-
LOTS of parts left.
J-box-kept
alternator-sold
antlers-sold
right riders peg-sold
Thanks to those that bought. All payment recieved and 1 order shipped. Getting rest out as quickly as I can.
Wayne
-
Hello KZZ1;
Came home from work today to find that the base plate for the right side front peg had arrived and in excellent condition. Thanks for shipping promptly!
Cordially, SlowSam
-
WOW, the postal service impressed me today. You are welcome.
Hello KZZ1;
Came home from work today to find that the base plate for the right side front peg had arrived and in excellent condition. Thanks for shipping promptly!
Cordially, SlowSam
-
Lots of stuff left including the bags, mirrors, genmar risers and a brand new petcock.
Wayne
-
Good Morning Kzz1King
Generator received in the dark of night looks good and will report install this weekend.
Thanks
Tj
PS: How much for petcock? I think that would fit in my stocking.
-
Glad to hear it sir. Murphs wants $73 for a new OEM. How about 25% off of that and I will ship. $55. If there is some other lesser value item let me know. May just throw it in for cost of shipping if I don't think I will need it.
Wayne
-
Morning Kzz1King
Installed last night after work and Conkankerous is off life support (charger).
Thank you for all your efforts and Happy Holidays.
Tj
PS: King did an excellent job packing the alternator above and beyound the average. +10 in my book.
-
:D :D
Morning Kzz1King
Installed last night after work and Conkankerous is off life support (charger).
Thank you for all your efforts and Happy Holidays.
Tj
PS: King did an excellent job packing the alternator above and beyound the average. +10 in my book.
-
I know it is a tough time of year to sell, with Christmas and all. But if you could use something let me know. Alternater, right drivers peg, antlers, jbox are gone.
The short risers with Murphs electric heated grips and grips, switch. $ 55 shipped.
Bags, scuffed up but great shape mechanically. A litle work and they could be nice I think $95 each shipped
Starter 67 shipped
flat style seat, needs recovering. 35 plus shipping costs
NEW OEM petcock $55 shipped
All parts that include shipping are CONUS only.
Ask about other parts such as plastics, wire harness and so fourth.
Wayne
-
Hey Wayne, Happy Holidays!!
Oh, and BTW - I may need the choke assembly off the left bar, including the cable and covering, if they're in fair condition.
What would you do me for?
Cheers!
-
Let me check into that Sam. I am off tomorrow so will check into it and let you know. Thanks
Wayne
Hey Wayne, Happy Holidays!!
Oh, and BTW - I may need the choke assembly off the left bar, including the cable and covering, if they're in fair condition.
What would you do me for?
Cheers!
-
Is this what you are looking for Sam? PM sent,let me know. Thanks.
Wayne
-
looking for a left 86 saddle bag and the cover for the built in rack on the rear
-
Here are the fairings pics that were requested. The pic with tape is where I reattached a mounting bolt. It has been holding well. The closeups show cracks. I will include headlight and marker lights for a bit more. I assume headlight assembly will add a bit to shipping costs. These have not been cleaned up ;D
-
Crack by turn lenses and one on main body.
-
PM sent
Wayne
PS Buy the bag and I will throw in the cover. Bag is solid, all latches work. Good shape considering the years.
looking for a left 6 saddle bag and the cover for the built in rack on the rear
Still have the right bag for sale. Last 2 pics. $75 plus shipping cost.
-
Check out the modified first post for an update. Thanks
-
Fairing stay?
-
Fairing stay?
Is that the one that kind of goes through the middle? My bike did not have one. If it is something else let me know. If it is this, sorry I do not. http://www.ebay.com/itm/90-KAWASAKI-ZG1000-ZG-1000-CONCOURS-FAIRING-STAY-1-/400065053319#ht_2455wt_952 (http://www.ebay.com/itm/90-KAWASAKI-ZG1000-ZG-1000-CONCOURS-FAIRING-STAY-1-/400065053319#ht_2455wt_952)
-
nope upper fairing stay/frame, this piece holds the upper fairing mirrors and cluster...
-
PM Sent
nope upper fairing stay/frame, this piece holds the upper fairing mirrors and cluster...
-
Are the front brake rotors available, and if yes, are they in good shape?
-
Are the front brake rotors available, and if yes, are they in good shape?
No, they are sold. Sorry.
-
UPDATED 01/11/2012 Look at first post. Think I am too high make an offer. Lots of parts not listed.THANKS!!
Wayne
-
Still have the heated grips?
-
Sorry, gone.
-
my 86 Connie and I got t-bone by a teenager last Thursday, looking for the following:
Headlight assembly
Right side mirror mount or bad mirror with good base. (I run aftermarket mirrors that require the stock fairing mount)
Right side mid-fairing
Right side drivers footrest assembly
windscreen
front fender
I can be reached at jdprice 66043 at yahoo dot com