« previous next »
Pages: « 1 2 3   Go Down

Author Topic: My front brake install, with pics.  (Read 16887 times)

Offline jamiemac

  • Full Member
  • ***
  • Posts: 605
  • Country: us
Re: My front brake install, with pics.
« Reply #40 on: November 04, 2012, 12:07:30 PM »
Excellent! Glad it went well for You.
Logged
2008 C14, Area-P carbon fiber, PCV, Rostra Cruise, LAAM leather seat, Optilux 1500 & MondoMoto MM10 lights, Cee Bailey windshield, BMC air filter, Warm & Safe dual dash mounted heat troller.

Offline reesedp

  • Full Member
  • ***
  • Posts: 250
  • Country: us
  • Sail Army
Re: My front brake install, with pics.
« Reply #41 on: November 17, 2012, 01:28:00 PM »
Just used this for my first pad change at 25k!  Wonderful write up.  The pads shuddered just before coming to a complete stop, but only for about 6 or 7 stops.  Now they seem to be perfect.  Have to go buy the 12 year old a new toothbrush though...
Logged

Offline C1xRider

  • Full Member
  • ***
  • Posts: 836
  • Country: us
  • Where did all the posts go?!??
Re: My front brake install, with pics.
« Reply #42 on: November 17, 2012, 02:56:35 PM »
Quote from: reesedp on November 17, 2012, 01:28:00 PM
Just used this for my first pad change at 25k!  Wonderful write up.  The pads shuddered just before coming to a complete stop, but only for about 6 or 7 stops.  Now they seem to be perfect.  Have to go buy the 12 year old a new toothbrush though...

Na, it'll clean up.  I bet he doesn't even notice.   ;)
Logged
--------------------   BACK UP YOUR DISKS PEOPLE!! -------------------------------
2012 K1600 GTL 8), 2010 C14 ABS, 2002 HD FXSTDI, 2000 XT350, 1998 C10, 1983 V65 Magna, 1978 HD SX250

Offline jamiemac

  • Full Member
  • ***
  • Posts: 605
  • Country: us
Re: My front brake install, with pics.
« Reply #43 on: May 15, 2017, 12:40:14 PM »
An update to this topic, as it seems to be relevant to some issues a fellow member is experiencing. My EBC pads are upwards of 12K miles, and still have some life left. After experiencing some antilock issues, I can confirm, the antilock unit is a solenoid type, and although not meant to be serviceable, it can be repaired, in a limited fashion. Hope the pics and info here helps out.

Mac.
Logged
2008 C14, Area-P carbon fiber, PCV, Rostra Cruise, LAAM leather seat, Optilux 1500 & MondoMoto MM10 lights, Cee Bailey windshield, BMC air filter, Warm & Safe dual dash mounted heat troller.
Pages: « 1 2 3   Go Up
« previous next »