« Reply #5 on: April 19, 2018, 03:56:40 PM »
I have the vent type newer OEM windshield on my '10 model so the holes are still in the same places, however there are some hardware differences. Screws and washers that are different
so some scrounging and ordering previous years small parts may be necessary, but I'd be very surprised if the Vstream didn't fit once the little pieces were there in hand.
But to be true to your question, no I don't know for sure.
That is my understanding, also... that the windshield support's dimensions and holes are all identical on all C14's, regardless of year. The 2008-2014 all have the same exact attachment hardware (retaining clamps, washers, bolts, and gaskets), regardless of screen. But the 2015+ used different attachment hardware for the newer "vented" OEM screen. So, if one were to get the previous attachment hardware, someone with a 2015-2018 C14 should be able to mount ANY screen that would fit a 2008-2014 C14 (and vice-versa.
Such parts should be readily orderable from a Kawasaki dealer.
« Last Edit: April 20, 2018, 06:45:33 AM by maxtog »
Logged
Shoodaben (was Guhl) Mountain Runner ECU flash, Canyon Cages front/rear, Helibars risers, Phil's wedges, Grip Puppies, Sargent World seat-low & heated & pod, Muzzy lowering links, Soupy's stand, Nautilus air horn, Admore lightbar, Ronnie's highway pegs, front running lights, all LED, helmet locks, RAM Xgrip, Sena SMH10, Throttle Tamer, MRA X-Creen, BearingUp Shifter, PR4-GT, Scorpion EXO-T1200,etc