Firmware update to version 3.1 is available this morning (8/1) here:
http://www.senabluetooth.com/support/download_document.phpRelease notes:
SMH10 Firmware Version 3.1 Release Notes
July 25, 2011
Copyright (c) 1998-2011, Sena Technologies, Inc.
INTRODUCTION
============
These release notes describe changes made since the firmware V3.0 release.
CHANGES
=======
- Bluetooth paring compatibility issue with some smart phones resolved
- Occasional Intercom/music play switching stability issue resolved
REVISION HISTORY
================
3.0 June 13, 2011
+ First public release
CONTACTS
========
Sena Technologies Inc.
3150 Almaden Expressway, Suite 238
San Jose, CA 95118
United States
url:
www.senabluetooth.comPhone: 408-448-1997
Fax: 408-907-3738
email:
info@senabluetooth.com support@senabluetooth.com1. Download Updater
2. Connect SMH-10
3. Install Updater
4. When the updater says to, turn on the SMH-10 to install the driver
5. Run the updater
6. Click "F/W Update"; the updater will open a location to store it
7. When the updater says to, hold down the Phone button
8. When the updater says to, hold down the phone & jog buttons
That's it; update complete. There's an interesting button labelled "Device Settings" in the updater; one of the choices is "EDR" (extended dynamic range?). I wonder what shutting that off does, and I wonder if Sena will be able to offer a way to set priority based on individual devices? Hmmm...