Kawasaki Concours Forum
The C10, aka Kawasaki Concours - The Original => The Bike - C10 => Topic started by: Chrome Megaphone on August 18, 2020, 12:19:23 AM
-
Anyone ever have to deal with this? When I removed the upper pieces fell out of the left side. Just finished putting this jigsaw puzzle together with JB Weld Plastic Bonder. What a headache. Might just epoxy theturn signal and windshield in to add strength.
-
In my experience Epoxy won't hold as it's ABS plastic.
I plastic welded mine and then reshaped it, filled it and repainted.
You can add fibreglass as a stiffener but that eventually peels off as well since the resin is just another type of epoxy.
-
In my experience Epoxy won't hold as it's ABS plastic.
I plastic welded mine and then reshaped it, filled it and repainted.
You can add fibreglass as a stiffener but that eventually peels off as well since the resin is just another type of epoxy.
Good tips but afraid its too late for that, used up nearly the entire amount of JB Plastic Bond with strips of Bondo panel patch and clear epoxy'd the turn signal. Seems stiff atm, if it falls apart may just go for a new fiberglass GPz fairing and do this:.
https://imgur.com/a/ARDO79U
-
Or... you could go naked.
Here's my Connie, Naked
-
Or... you could go naked.
Here's my Connie, Naked
That is very VERY badass. :finger_fing11: :chugbeer: