Why dones my bike bike sometimes die when coming to a stop?

[katata1100]

My '11 will sometimes dies when I pull to a stop. It does it with one bar reading on the temp gauge and it starts right up and doesn't do it again. WTF?

[gPink]

Maybe turn the idle up to 1000-1200 rpm.

[VirginiaJim]

See above....my idle is about 1200.

[556ALPHA]

+1.  Also adjust your throttle cable and do not roll fwd on the gas as you stop.

[maxtog]

+3

Adjust idle speed up a tad and remove play in throttle

[Pokey]

See above....my idle is about 1200.

Mine flirts with 1300, seems to be what she likes the best. And yeah the throttle cable adjustment is also very important IMHO.

[katata1100]

I paid attention to the rpm gauge today and it was at 1,000. Pulling to the same interception, it dropped down to under 1000, didn't stall though.
So, when I arrived at work, the bike was idling smoothly at 1000. I raised it to what looked like 1200, will see how it goes.
Thanks!

[Pokey]

I paid attention to the rpm gauge today and it was at 1,000. Pulling to the same interception, it dropped down to under 1000, didn't stall though.
So, when I arrived at work, the bike was idling smoothly at 1000. I raised it to what looked like 1200, will see how it goes.
Thanks!

That should do it, now check the free play on those throttle cables too.  

[freebird6]

thanks for posting this as mine has recently begun doing this also. Great info.

[VirginiaJim]

I've updated the Interesting Facts portion of the Wiki with this information.  I thought I had but we lost so much after the Crash.

http://www.zggtr.org/index.php?topic=93.msg570#msg570