Quick question on the wiring for the Rosta CC switch.
Rosta has the following 4 wires on a Molex style connector that is part of the main harness:
Yellow
Green
Red w/Brown
Red
The solid red is clearly the power wire as it has a 4amp fuse inline. There is also the two wire connector for the LED (Lt. Blue and Black wires).
The switch Murph's sells (CCS-100) has four loose wires:
Yellow
Green
Brown
Red
...and two more wires on a separate connector that I"m assuming are for the LED:
Black
Gray
My question pertains to matching up the 4 wires from the Rosta harness to the 4 wires from the switch. My
guess is that it goes like this, but I'd rather know for certain rather than risk it.
Yellow to Yellow
Green to Green
Red w/Brown to Brown
Red to Red (power)
Lt. Blue to Gray (LED power)
Black to Black (LED ground)
Can someone verify that's correct so I can finish this up tonight? I don't want to leave my poor bike looking like this all night.