I'll get this thread going so that it's available by search later in time, even though this is about the time of year that folks start pulling these off, but in the winter man are they nice... 
 
There's a couple options out there... I'll let others post up what they use.
 
I went with the ProjektD ones and was very pleased, they really take the wind off your hands and keep them warmer in the winter months. 
 
http://projektd.com/product_info.php?cPath=27_58&products_id=178
 
Here's some pics of mine.
 







 

Do they work with risers?  Wind flow might be off.

Do they work with risers?  Wind flow might be off.

Yep, I've got the 2" Helibar risers and they work great!
 

 

Yep, I've got the 2" Helibar risers and they work great!

Your mirrors are higher than the 08 right?

Your mirrors are higher than the 08 right?

I have an 09, same mirror height as 08...

Yep, I've got the 2" Helibar risers and they work great!
 

Wow, love the power outlet in the riser!

 

Wow, love the power outlet in the riser!

 

Thanks Mike, go Pack!
 
Here's a link to the power outlet thread...
http://zggtr.org/index.php?topic=311.0
 

i think they offer that as an option when you buy them.  one thing that i WILL get with my risers.
with risers will my '11 need these or not.  it has good hand protection as it is now but after riders i am not sure.

Your mirrors are higher than the 08 right?

I have a 2011 and was thinking that if the mirrors were a bit higher, the air would be deflected from the hand area, AND you would see less of the saddlebags!

Peter

I started off with a set of Metalbenders, which are very similar to the ones you have. They were excellent hand guards but they were just a tad too big when used with a Calsci windshield so I bought a set of Baker Hand Wings. The hand wings are just slightly less effective in the winter but they have the great advantage that they can be turned about 90 degrees and have outside air diverted to the rider. I find they are easily worth 15 F and maybe 20 F in comfort when it is hot out. I ended up leaving the Bakers on all year and just rotate them as necessary.

Brian

I'll get this thread going so that it's available by search later in time, even though this is about the time of year that folks start pulling these off, but in the winter man are they nice... 
 
There's a couple options out there... I'll let others post up what they use.
 
I went with the ProjektD ones and was very pleased, they really take the wind off your hands and keep them warmer in the winter months. 
 
<snipped photos>

Metalbenders have worked great for me. I heard he quit building them some time back but I would highly reccomend them if a set becomes available.

I have the Motax deflectors and just installed the CalSci Shorty. They look great together. Of course the deflectors will be coming off soon.

I haven't tried em both out together yet but the deflectors work great.

on the '10 i don't have trouble. slight breeze on the hands but no wind or bug blasts

on the '10 i don't have trouble. slight breeze on the hands but no wind or bug blasts

are you using risers or not?  just wondering. thanks.

are you using risers or not?  just wondering. thanks.

no risers- of course risers will put our hands in the wrong position for the '10 mirrors.  Kawi addressed mirror position in regards to complaints about the '08-09, and the 10's are spot-on for both site over the bags and wind position

Metalbenders have worked great for me. I heard he quit building them some time back but I would highly reccomend them if a set becomes available.

The following is just my opinion about the Baker hand wings and the Metalbender air deflectors (not made anymore).

+1 excellent product. I removed the Bakers for the Metalbenders. I personally found the Metalbender deflectors to be far superior to the Bakers in every aspect except being able to open them in the heat. But they always loosened every time I moved them which required tightening the single mounting screw each time I moved it. IMO, the bakers are a poor design. A two screw bracket would probably fix most of the Baker's down sides. I removed the wings in the summer also, which negated any of the more positive aspects of the Baker's for myself. Now I'm not saying that the Bakers are bad. Only that the Metalbender deflectors were IMO, far superior for strength, design and coverage in the cold and rain. Too bad Metalbender stopped making his wings. But the basic design is very good! Maybe someone will take up making a similar product in the future!

MetalBender hand wind deflectors:













Now for comparison, the Baker air wings:

on the '10 i don't have trouble. slight breeze on the hands but no wind or bug blasts

Those really cold Florida mornings eh Steve... 

I have a 2010 with the Heli-Bar risers.  I also use the Cal-Sci XL screen in the winter.  I can tell you that some sort of wings are a necessity with this set-up.  With the screen all the way up, there is a ridiculous amount of air going straight to my hands--hand warmers or not.  I have the Motax deflectors, but haven't used them yet.  I didn't get them until the weather got warmer and I've also been waiting to get the brackets back from the powdercoater. 

Here's some pics with the Motax air deflectors and my new CalSci shield.

Well, summer is finally coming into the Pac NW, today I removed my air wings and wore my summer gloves! 
    
 
I love these wings but I'm hoping I don't have to put them back on for another 6 months if you know what I mean...