I can assume you didn't forget the kill switch. This is a classic sign of a " Junction Box" failure. There are three relays inside the box where the fuses are. the weight of the relays and vibration tends to break the solder joints. If the Main relay does not click in, nothing works. Many of us have removed the Jbox, turned it over and drilled the heads off the plastic rivets, and resoldered every pin on the circuit board., plug the connectors back in and all is well. If you are not so inclined to try to resolder it yourself, you can just replace the J Box. I think one of our members still rebuilds them and replaces the relays with higher quality relays. Good Luck