I'm a little confused, and wanted to know if its just my bike. I had the OEM stones on her for the first year (I have a black 2011), and 10K miles. When I picked up the bike the TPM indicated 36 front and 38 rear. When warm they didn't get much above 37/39 respectively. After reading the forums I figured 42 PSI was the proper temp. So i over filled my tires at the local gas station and road it a block - checked the TPM and released air until I had an indicated 42 front and rear. At my 600 mile fill up the service guy said they were over filled and released some air until his gauge indicated 42 PSI front and rear. my dash indicated 36/38 again. So i filled up the tires once more till [it] showed 42, and changed my own oil and checked my own bolts each following service. I just hit 11K miles so I just had the tires changed to PR3s. I told the dealer I need 42 F/R, and when i got the bike back (insert irony here) 36/38! So i went to the auto parts store and got my own gauge to check the pressure. Sure enough it showed 42 PSI! So I got my wife's digital unit from her car, and it indicated 41 PSI.
So after this long story, I'm asking. Is my bike reading low? Is that a warranty fix? I'm figuring between the dealer, my two gauges, and a tire change...something's not right.