1
For Sale / Re: Freds Maint CD's
« Last post by hank on Today at 01:43:12 PM »bump
Kawasaki Concours Forum
News:
Recent Posts
2
The Bike - C14/GTR 1400 / Re: Anyone know where this bolt came from?
« Last post by Boomer on April 30, 2024, 05:01:59 AM »I was confused about this as I had checked the part number on the fiches, but it seems the part number for that bolt changed between the 2008 model and the 2012.
That bolt that holds the link pipe to the frame on the 2008 it is 92153-1930, but on the 2012 is is 92153-1837, so is indeed the same as the brake caliper bolts on the later models.
That bolt that holds the link pipe to the frame on the 2008 it is 92153-1930, but on the 2012 is is 92153-1837, so is indeed the same as the brake caliper bolts on the later models.
3
The Bike - C14/GTR 1400 / Re: Anyone know where this bolt came from?
« Last post by Rubber_Snake on April 29, 2024, 11:13:31 AM »
berna1201 
4
The Bike - C14/GTR 1400 / Re: Anyone know where this bolt came from?
« Last post by denver6 on April 29, 2024, 10:15:52 AM »berna1201 - thanks for the answer - that's it!! I did forget to mention I have a Delkevic exhaust. That went on probably 10 years ago. Since the Delkevic does not have the same bracket as the stock muffler, there is no need for the bolt. I must have left it in just to hold the two bushings in place - I really don't remember. The two bushings were probably also on the trailer floor, but I did recognize them as being part of the same assembly so I ignored them.
Thanks again - I feel better now
Thanks again - I feel better now
5
The Bike - C14/GTR 1400 / Re: Anyone know where this bolt came from?
« Last post by berna1201 on April 29, 2024, 03:23:49 AM »exhaust bolts 92153-1837
the same reference as for the front brake calipers
https://www.partzilla.com/product/kawasaki/92153-1837
the same reference as for the front brake calipers
https://www.partzilla.com/product/kawasaki/92153-1837
6
The Bike - C14/GTR 1400 / Re: Anyone know where this bolt came from?
« Last post by Boomer on April 29, 2024, 02:56:40 AM »Hi Berna,
None of those bolts have that shape head.
The suspension ones you suggest have parallel sides on the head and the exhaust one has a much wider, flatter head than the bolt he shows.
None of those bolts have that shape head.
The suspension ones you suggest have parallel sides on the head and the exhaust one has a much wider, flatter head than the bolt he shows.
7
The Bike - C14/GTR 1400 / Re: Anyone know where this bolt came from?
« Last post by berna1201 on April 29, 2024, 01:47:45 AM »Hello
8
The Bike - C10 / Re: ZG1000 in GPz900 clothing
« Last post by berna1201 on April 27, 2024, 09:41:49 PM »it is obvious in the photo
9
The Bike - C10 / Re: ZG1000 in GPz900 clothing
« Last post by Chrome Megaphone on April 27, 2024, 08:43:54 PM »I went into Ebay and found some left footpegs and brackets.
Unfortunately for the $$ they want for the used parts you can almost buy the new. All shown here.
https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2499334.m570.l1313&_nkw=left+foot+peg+zg-1000&_sacat=10063
I'm picking up a crashed C-10 next month (for the engine).
If it has the left peg, I'll let you know.
Ride safe, Ted
Quote
PS: Do you still have the over bored cylinders? If it's not damaged, I might be interested.
I have the needed pistons and rods for a 1052 and have been thinking about doing this mod for years.
It was destroyed in the two affected cylinders.
10
The Bike - C14/GTR 1400 / Re: Anyone know where this bolt came from?
« Last post by berna1201 on April 26, 2024, 11:00:40 PM »Hello
for a bolt to fall on the trailer, either the roads are really bad, or the trailer jumps a lot
for a bolt to fall on the trailer, either the roads are really bad, or the trailer jumps a lot