transmission issue

[GPz1100]

any had shifting problems? my shifter is hanging "up" after going in 2nd. changed oil about 1000 miles before this started. same oil as always, amsoil 10-40 for bikes...no problems prior to this. also in 1st and 2nd i'm getting a rough vibration that wasn't there before.
imminent transmission failure?

[C1xRider]

When in doubt, put in genuine Kawasaki oil and re-test.  If it's still there, you have your answer.

Hmm, another oil thread, with classic Amsoil bashing about to begin...

   

[GPz1100]

no, we ain't going there.

[Tactical_Mik]

Just throwing this out there, but some have suggested that a re-torque of engine mounts would settle some vibs.  Might help some.  As soon as it's not 110 degrees I am going to give it a try.

[Rudy]

Amzoil reduced the amount of zinc additive in their oil. Try adding a zinc additive to the oil. There are several brands available on ebay. It worked for me.

[jonathan]

What do you mean by "hanging up"? That you have difficulty shifting out of second gear?

[GPz1100]

i have to 'tap' down on the shifter so i can shift into 3rd

[IRULE]

Could it be your clutch that is hanging up instead of your transmission?  Could it be that your clutch is not fully disengage?