Author Topic: BANSHEE HORN safety system  (Read 1888 times)

Offline kawamark

  • Jr. Member
  • **
  • Posts: 24
  • Country: 00
BANSHEE HORN safety system
« on: January 03, 2012, 03:32:12 PM »
Found this interesting...

http://www.kickstarter.com/projects/153591688/banshee-horn-safety-system-for-motorcycles-cars-an

"...The electronics in this product control the loud air horn and the high beam lights. If you press the horn switch briefly, only the regular horn is activated. Pressing the switch for ½ second causes the logic in the control unit to now engage the raucous air horn (135 decibel) and high beam lights. When doing this, it pulses both the horn and lights for even greater impact - as shown in the video.

When designing the electronics we paid particular attention to safety. We do not in any way alter the regular horn system in the motorcycle or car to keep within DOT (Dept of Transportation) regulations.

Also, we don’t put any electrical loads on the existing vehicle wiring because we take our power directly from the battery.

The Banshee Horn system has been patented to cover all types of motor vehicles including several design forms and iterations..."

Mark L. Johnson


Offline Walker18

  • Arena
  • Full Member
  • ***
  • Posts: 287
  • Country: us
Re: BANSHEE HORN safety system
« Reply #1 on: January 04, 2012, 12:01:37 AM »
Good, no, great find Mark.. I've been holding off on the Stebel horns (though it looks like that is what their using), but with the harness and
modulators for the horn and lights? I'm sold, and pledged.. Hoping that they reach their goal and produce it!
COG#8443                                                  
AMA# 1088783
2012 C-14  'Rudy'