I used the ignition key to unlock the gas cap. After refueling, the key would not come out of the gas cap. Either, while pressing down and twisting the key to open the gas cap or pushing down to close it, I guess that is when the key got bent. I got the key out and it was visually bent. I straightened it out and put it back in the ignition and tried to turned the key. The key wouldn’t turn and I couldn’t remove it. Of course this all happened while I’m on my way to work and running late. I “jimmied” the key and it finally turned to the “on” position. I got to work and told Security to keep an eye on my bike. Long story short, I took it to the dealer and they were able to remove the key. Diagnosis – bent key.
Because the key does not sit all the way down in the gas cap or saddle bags, possibly bending the key will always be a problem (at least for me). Anyone else have this issue? I will scan the forum for possible solutions.