Ugocon ...amico mio x favore "Traduci"
Questi 2 sensori Ruota ANT/POST/sono con batterie a 3v che servono per alimentare i 2 dispositivi che lavorano ad onde radio per la trasmissione al quadro strumenti per i valori del KPA-PSI degli pneumatici.
Avendo avuto segnalazioni dal display batteria scarica sia a ruota ant/post. ho verificato il tutto,ma la batteria del sensore del pneumatico è in piena forma.3,3v "Mistero".
MGvalerio
Valerio, I think our friends here have already understood the sense of your video. (penso abbiano già capito cosa vuoi dire)
I will recap it anyway:
Valerio gets a "no battery" warning on the display for the tire pressure sensors.
He then wants to check the battery and, as you can see in the video, he reads a voltage of 3,03 V.
He is amazed because, according to him, with such voltage the sensors should work.
Well Valerio, if the batteries produced 3,3 V you would be right: this means a working battery.
But you didn't measure 3,3, you read 3,03 V instead (zeros are important
) thus almost 0,3 V lower than it should be: a lot!
In the end, you are mounting exhaust batteries and you need to replace them. If they lasted 6 years, you've been very lucky!
Italian for him:
Valerio, le batterie devono segnare 3,3 V per funzionare, ma tu ne hai misurati 3,03, circa 0,3 V di meno: te credo che non funzionano più!
Le devi sostituire.
Se sono durate 6 anni, sei stato molto fortunato!