UPDATE:
Well I have replaced the wire harness.
Everything appears to be working but still no start. It appears that the bike is not getting any spark and it is leading in the direction of a bad ecu.
I have also bench tested all of the sensors and everything passed. I even went so far as leaving the crank sensor unplugged to see if I could get a code on the dash! Good news is it did code and showed a crank sensor fault.
So I know the ecu is at least talking to the bikebut whatever triggers the coils isnt firing them. I cant find anything else wrong.
I have found another dealer somewhat close to me that has KDS and will run a dignostic on it for $216.00. He said it may or may not show the problem.
So I guess I get the diag and of ot shows a problem with the ecu it is replacement time.
Does anyone know if it is possible to reflash a used ecu to my bike using KDS? Dealer didnt know?
Said he will have to call Kawasaki???
On a side note: pulling the main wiring harness is a challenge and requires the engine to dropped down from the frame. Not a fun job!!
Just PSA
The saga continues.