I likey...how about the mirrors? Can we get the mirrors, sans red/blue lights of course? It would be nice to have the signal lights work there as well.+1
Here is a picture of the second taillight/brake light. It comes with the harness to tie into the factory harness (some soldering required). The two small LED's can be amber or red.
Correct, it goes between the plate and the bike. I should note that if you are using a fancy license plate frame with large lettering on the bottom of it, it will be a very tight fit with this light.Thanks for the response. I helps to establish credibility in a less than credible internet world.
@ gpink. As the first post states, we designed these products for our police bike and thought we would offer them to the public. We do not have them on a website so there is not a link I can give you. I can give you probably 20 agencies that you call for reference on the risers if you would like. Our business didn't need the advertising you are searching for when dealing with Agencies.
http://www.kawasakipolice.com/ is our website and https://www.facebook.com/#!/pages/Kawasaki-Authority-Sales/172018146149154 is our Facebook page.
Selling our products to the public is not a problem other than red and blue emergency lights.
Thanks for the response. I helps to establish credibility in a less than credible internet world.
Here is a picture of the second taillight/brake light. It comes with the harness to tie into the factory harness (some soldering required). The two small LED's can be amber or red.
Are these an LED board or TIR3 design?
I bet you could sell a few police trunks ,radio box's whatever you call them , how much for trunk and back pads? any special mounts, are these the ones you have to cut the rear rack? lights to mount on trunks . Thanks jim