Marketplace > Industry Merchants

4 inch Bar Risers with 3 inch Pull Back to the Rider

(1/2) > >>

Kas:
We continue go lower the inventory and are selling;

 4 inch Bar Riser's that bring the grips back to the rider 3 inches.  You can use both the factory hoses and cables with the throttle cable rerouted.  The 4 inch risers can be used with 2008 thru 2013 C-14's. 

 3 inch Bar Risers that bring the grips back to the rider 2 1/2 inches. The factory hoses and cables can be used. These will block access to the glove box on 2008-09 C-14's.   

 2 inch Bar Risers that bring the grips back to the rider 2 inches. Again these will  block access to the glove box on the 2008-09 models.

All Bar Risers are $325.00 delivered to the lower 48 states.

Both risers are powder coated billeted aluminum and drilled and threaded for Motorcycle Larry's 5/16ths Ram Ball mounts.  All Bar Risers come with all mounting hardware (no black plugs are included).

 

mvjr1904:
Any pictures available?
Maybe an overhead picture to see how much pull back there is vice the stock position

Kas:
Here are some additional photo's of the Bar Risers on a Concours.

Kas:
These photos show the handle bar location with a 1 3/4 in bar riser and the handle bar locartion with a 4 inch bar riser with a 3 inch pull back to the rider.

The 3 inch pull back relieves the "between the shoulder ache", it lets a tall sit upright taking the weight off his shoulders and allows the not so tall rider to sit back in the seat.

Gumby:
Did I miss the link to a website?

Navigation

[0] Message Index

[#] Next page