Kawasaki Concours Forum
Mish mash => Open Forum => Topic started by: r2t2 on December 17, 2011, 11:46:42 PM
-
It's been quite a while since I last posted. It became rather depressing reading about the bikes and riding when I couldn't. It's been a roller coaster ride of a year. I was slammed at work (but finally have help) and my back became such a royal pain that I went under the knife back in August. I only goat about 100 miles of riding in... That truly sucks. The pain was so bad that I even had to sell the Miata because I couldn't bear even sitting in it for more than a few minutes. The Miata was replaced with a 2002 (bugeye) WRX and that's been about the only thing that I could drive/ride that is still fun.
I had to have the L5 and L4 fused, a disc replaced, another disc repaired and a fair amount of metal (screws) added to my anatomy. I'm really hoping that I get the green light to ride this coming spring. I've jonesed so bad that I've actually fired the C14 up, sat on it and rev's the throttle. :-[ That's desperation. The WRX has helped to lessen the agony, but I still wanna ride!
The back IS getting better and I'm enjoying the (nearly) pain free lifestyle... ;D I guess skiing is out this season, so I really can't wait for spring (and the surgeon's blessing to ride). So, I feel good enough that I'm starting to re-visit motorcycle sites again... I was hoping that my Christmas present was going to be told that I would no longer be required to wear the brace, but that's not gonna happen. I'll be in the brace for at least 6 months...
Well, that's it for now. I just wanted to say hi and I'm not dead yet!
Later.
RayK
-
I had a Micro Discectomy Oct12th. Back felt better, but not right, went elk hunting a month later, Pappy and I got our elk, buddy hauled em both out. I just had another MRI, this one with contrast dye. Reading the report it looks worse then when I went in the first time, I'll know more next thursday, intial speculation was more surgery, not sure what. I went out to fire up the 14, she was deader then a door nail. Had some help to wheel the bike into the shop, yanked batter and it is on a charger. While I was waiting on that I decided to paint my KLR, the plastics are all done and I have decided to name her "Sanddammit". Look pretty sharp for an ugly bike. Next up will be the ZX TBs, starting that Monday after an appointment for Pappy. Everything will be at eye level, heaviest lifting will be the almost empty tank. Since I have her in the shop I will have some heat and no rush to get her done, cant ride her anyway........I'm not looking to get cut on again, but I need to be right by this Spring. I have a lot of reloading I need to do, I feel like that should be OK, but I wont know untill I begin. I was hoping to be back to work by know, looks like I wont return 'till mid Jan................. I do know we will have a bunch of boards all milled up and my shop should be back in order. I will also install a sliding garage door opener so I can start parking my bike inside as she deserves.
-
Hope you don't mind some advice.
I personally have had 2 back surgeries now. First was a double disc replacement on L3 & 4, the 2nd. was a clean-up of some scar tissue and scrape a disc that was nicked during the first surgery.
My best advice is simple, stretch as often as possible, especially after sitting a while. And keep the weight off the middle, in other words, a small spare tire along the belt line. I have found that doing both keeps the muscles and ligaments pretty loose. This works for me, just some input that might help.
Ride safe all, and please ATGATT.
Greg
-
I'm fortunate to have found a PT therapist that is also a Pilates instructor. She has me on a regime that has worked wonders. I really feel like crap if I don't do my routine in the morning. The weight's slowly dropping, but the upside in that some of the lard is being replaced with muscle mass. I'm following the medical instructions (probably for the first time in my life) and I do NOT want to back under the knife. It's kind of funny, you get surgery and have to go back in to the get the scar tissue cleaned up. The Connie is my carrot... So I have plenty of motivation to do the recovery right.
-
Sorry to hear about your health problems but great to see you back Ray. The 'old timer' C-14 folk are getting a bit thin around here lately.
Best of luck with both the health problems and riding in the future.
Brian
It's been quite a while since I last posted. It became rather depressing reading about the bikes and riding when I couldn't. It's been a roller coaster ride of a year. I was slammed at work (but finally have help) and my back became such a royal pain that I went under the knife back in August. I only goat about 100 miles of riding in... That truly sucks. The pain was so bad that I even had to sell the Miata because I couldn't bear even sitting in it for more than a few minutes. The Miata was replaced with a 2002 (bugeye) WRX and that's been about the only thing that I could drive/ride that is still fun.
<snip>
Well, that's it for now. I just wanted to say hi and I'm not dead yet!
Later.
RayK
-
Keep working on you back and avoid the knife . Now I just have to remove the Spare tire on my mid section ( think 40 pounds ) .
-
Sorry to hear about your health problems but great to see you back Ray. The 'old timer' C-14 folk are getting a bit thin around here lately.
Brian
I'm not thin at all and the holidays don't help one bit....
-
A belated Merry Xmas guys... On Christmas day I went out into the garage, started the bike, sat on it and let IT make the vroom-vroom sounds... :D I've been working on the machine religiously every day :D The improvement is there and it is getting better. Just damned slow! My goal is to ride to the upcoming Annual Bun Cooler in May of '12.
Are we there yet???
-
I had a stroke Apr 15th. Still not back to work, damn it. I didn't get much riding in this year at all. But I'll be ready in 2012.
Don't let the blood pressure get away.
My goal is to ride to the upcoming Annual Bun Cooler in May of '12.
I hope to see you there r2t2!
-
I cann't believe no one has said this yet! Why don't you ask Kenny Rogers?
Jack
-
Hey Ray!
I had the L-4-L5 fused and it worked out pretty good.....after time I bought an R32 VW on H & R coilovers (sprung tight!), A BMW K1200LT( Sold) and my lovely C-14......often the fusion works-have a great new year!!
Mike
-
Tim... That means we'll both be jonesin' to ride Lolo Pass! Looking forward to seeing you at Kooskia.
Jack... Good catch... ;)
I VERY happy to hear that Mike. I'm rather tired of the few that tell me that I'm screwed and the fusion doesn't work... I just know that I won't be riding any Ducs, RRs or cruisers. I'm slowly losing some weight (and some of my gut) and I know that will help too. I'll just keep plugging along. Besides, I wanna get a chance to get a real ride on the Penske suspension... ;D