Ok all, got my MM10 light kit installed today on the reflector brackets. Nice spot. I also fabricated a switch mount myself out of a piece of 1" aluminum from Lowes, found spacers, and M6 x 1.0 - 40mm hex head black bolts. Mounted the switch on the right handlebar side (pics to come). The bolts were a bit too long so I screwed each bolt all the way into an M6 die, cut about an 1/8" off, and then backed the bolt out of the tap to clean up the threads. Worked like a charm.
Can those that have these lights let me know how you went about aiming them? What was the procedure you used? Thanks for the input. Cleaning up now but will take some pics and post them shortly. Thanks in advance.