Author Topic: Fricking Oil Filters  (Read 7701 times)

Offline Pfloydgad

  • Full Member
  • ***
  • Posts: 356
  • Country: us
  • When I was a child, I caught a fleeting glimpse
Fricking Oil Filters
« on: August 22, 2011, 04:03:00 PM »
Ok, just some info from Central Ohio. Trying to find an oil filter for my 01, my local Kaw dealership doesn't even stock them anymore. But the one from Mama Kaw is $13.   :o
 Used to get them at Wally World, and Meijers, no more. Advanced Auto and Napa, Nope, can order for $12.
So I hit O'Reilly, kinda new to my area here in Springfield, but nationwide has 3700 stores.
Found a Wix #24941 , and the Manager showed me a quality report. It is quite a bit better then Fram and K & N. And Mama Kaw was terrible.
This is a normal stock filter, or one day order if dealer is out.

And $6.99 is a good price, considering retail is $12.

So here are the numbers so far.
Fram: CH6012: hard to find, $6 to $10
Fram: CH6009; same as above
WIX: 24941: Any O'Reillys for $6.99 anyday of the week
Don't know if you have problems finding them in your area, but hopefully if you need this info, it helps.
Everone ride safe, and ATGATT, remember, someone loves you.
Greg
Why did we have to run for cover with the promise of a brave new world unfold beneath the clear blue sky ?

Offline MAN OF BLUES

  • Arena
  • Sr. Member
  • ****
  • Posts: 2898
  • Country: 00
  • WHISKEY.Tango.Foxtrot.
Re: Fricking Oil Filters
« Reply #1 on: August 22, 2011, 04:23:30 PM »
hey Greg....break out the hidaway money and spring for a SPOOFAK.... ;)

46 YEARS OF KAW.....  47 years of DEVO..

Offline Outback_Jon

  • Arena
  • Full Member
  • ***
  • Posts: 427
  • Country: us
Re: Fricking Oil Filters
« Reply #2 on: August 22, 2011, 04:30:59 PM »
The Advance Auto near me always has a few of the Fram CH6012 filters in stock, and for about $6.  Walmart sometimes has them.

I just went the SPOOFAK route, though, and have a plethora of filters to choose from.
"Outback Jon" Gould *** South Cairo, NY *** COG #9506 *** 2006 C10 "Blueline" *** CDA #0157

Offline BrianM

  • Jr. Member
  • **
  • Posts: 48
  • Country: us
Re: Fricking Oil Filters
« Reply #3 on: August 22, 2011, 05:09:41 PM »
This isn't enough filter options?

    Amsoil: SMF 101 (No longer available. Replaced by WIX 24941.)
    CarQuest: CFI-89941
    Emgo: 10-37500 (includes O-rings) 10-20300 (doesn't have O-rings)
    Fram: CH6012
    Hastings: LF571
    Honda: 15410-426-010 or 15410-300-024
    Kawasaki: 16099-003
    K&N: KN-401
    NAPA: PS4941 (formerly 4941)
    Perf-Form: OF-0047 (formerly J-501)
    Purolator: ML16812
    STP: SMO-12 (Once readily available, now appears to have been discontinued.)
    Triumph: 1210031
    Vesrah: SF-4004
    WIX: 24941
    Yamaha: 36Y-13441-00


Yes, that's all known filters that fit...

Offline Summit670

  • Full Member
  • ***
  • Posts: 482
  • Country: us
Re: Fricking Oil Filters
« Reply #4 on: August 22, 2011, 05:59:46 PM »
Get the spin-on adapter, cut out the belly pan a little and never look back.  Oil changes without removing any plastic.
Arctic Cat M8 163 rules

Sleds, Dirt Bikes, ATV's, Street Bikes, Mountain Bikes.  Heck, I guess if it has handlebars I'll give it a try.

Offline Pfloydgad

  • Full Member
  • ***
  • Posts: 356
  • Country: us
  • When I was a child, I caught a fleeting glimpse
Re: Fricking Oil Filters
« Reply #5 on: August 22, 2011, 06:22:52 PM »
Brian M,
Hey man, if your going to steal a thread, would you please have all your ducks in a row and info inline!
I just hate when I need to go searching for more info.  ;).
Great addition, I actually didn't know there was that many. Thanks for the info.
Ride safe all, and, ATGATT please.
Greg
Why did we have to run for cover with the promise of a brave new world unfold beneath the clear blue sky ?

Offline roadrunner322

  • Jr. Member
  • **
  • Posts: 24
  • Country: us
Re: Fricking Oil Filters
« Reply #6 on: August 22, 2011, 06:41:17 PM »
I bought one from NAPA locally from stock.
Currently Own
1985 Kawasaki ZN700

Offline Crashcup

  • Jr. Member
  • **
  • Posts: 68
  • Country: 00
Re: Fricking Oil Filters
« Reply #7 on: August 22, 2011, 07:17:00 PM »
Get the spin-on adapter, cut out the belly pan a little and never look back.  Oil changes without removing any plastic.

I have the adapter, but  haven't cut out the belly pan. I was a little concerned that oil draining from the plugs would drip onto the belly pan anyway and make a mess. Have you had any problem with this?
2005 Concours - "Vanessa"
1999 VFR800 - "Stella"

Offline T Cro ®

  • Administrator
  • Sr. Member
  • *****
  • Posts: 1743
  • Country: us
Re: Fricking Oil Filters
« Reply #8 on: August 22, 2011, 07:47:26 PM »
I have the adapter, but  haven't cut out the belly pan. I was a little concerned that oil draining from the plugs would drip onto the belly pan anyway and make a mess. Have you had any problem with this?

Nope..... The only reason for the cut out is so that there is no interfearance from the belly pan and the filter itself if the long filter is used and/or so that there is no reason to remove the belly pan to remove the filter. The two oil drain bolts are not under the belly pan so no change there. The only issue I've got with mine is the same as I had before in that you will still drip some oil on the belly pan's metal cross member and that's just an extra 20 seconds to wipe off the drippage.
Tony P. Crochet
(SOLD) 01 Concours Winner of COG Most Modified in 2010

Offline kbecker3

  • Newbie
  • *
  • Posts: 19
  • Country: us
Re: Fricking Oil Filters
« Reply #9 on: August 23, 2011, 07:43:44 AM »
Dont know if this helps anyone, but I have been ordering mine on http://www.knfilters.com/ If you order 2 or more they have free ground UPS shipping. The filters are $7.49 a piece, so for $15, you get 2, and you dont have to go anywhere. That price is for the cartridge filter (kn-401). I am not sure how much the filters are if you have the SPOOFAK. Almost forgot to mention that the kn-401 comes with the new o-ring too.
2005 concours

Offline midnightrider

  • Arena
  • Jr. Member
  • **
  • Posts: 77
  • Country: us
Re: Fricking Oil Filters
« Reply #10 on: August 23, 2011, 09:20:03 AM »
Supertech 7317, $2.85 from Walmart. Ok, flame away, I can take it.  ;D
2004 C10 RIP

Offline kbecker3

  • Newbie
  • *
  • Posts: 19
  • Country: us
Re: Fricking Oil Filters
« Reply #11 on: August 23, 2011, 09:48:21 AM »
Supertech 7317, $2.85 from Walmart. Ok, flame away, I can take it.  ;D


Actually from the searching i have done, supertech isn't all that bad from what i can find. Its tons better than fram, but we wont go there.....
2005 concours

Offline tvpierce

  • Jr. Member
  • **
  • Posts: 76
  • Country: us
  • '99 Concours
Re: Fricking Oil Filters
« Reply #12 on: August 23, 2011, 11:34:57 AM »
I haven't bought an oil filter from a bricks and mortar store in more than 10 years.  Whenever I buy parts online for one of my bikes or cars, I include a few filters in the order.  Lots of times the price of the filters is just enough to get me over the free-shipping threshold.   Plus I never have to wonder if I have a filter in the parts box... because I always do.
I don't want a pickle... I just wanna ride my motorsickle.

Offline Leo

  • Full Member
  • ***
  • Posts: 366
  • Country: us
Re: Fricking Oil Filters
« Reply #13 on: August 23, 2011, 11:47:38 AM »
After trying the auto parts stores and the local motorcycle shop, I found that Menards lumber yard stocks 6012 Fram filters.  I got 2 for $7.00 on special.  that was the last two on the shelf, but last week I noticed they had more.   
Yep, still riding the old one

In Indiana, missing Texas

Offline throb

  • Full Member
  • ***
  • Posts: 214
  • Country: us
Re: Fricking Oil Filters
« Reply #14 on: August 23, 2011, 06:42:52 PM »
Quote
Found a Wix #24941 , and the Manager showed me a quality report. It is quite a bit better then Fram and K & N. And Mama Kaw was terrible.

Do the WIX filters come with the new O-rings like the K&N'S?

Any idea who the author of the quality report was?  I have always heard good things about WIX filters, but have been using K & N in my Connie.  If the WIX is even marginally better, I'll start running those.     :stirpot:
'05 Concours, SISF's 2 min jet mod and exhaust cam sprocket, snarf's block off plates, risers, SS lines, fork brace, T-Cro's stick coils & shift linkage, ZZR1200 rear shock, MS rear wheel.

Offline T Cro ®

  • Administrator
  • Sr. Member
  • *****
  • Posts: 1743
  • Country: us
Re: Fricking Oil Filters
« Reply #15 on: August 23, 2011, 09:05:46 PM »
Do the WIX filters come with the new O-rings like the K&N'S?

Any idea who the author of the quality report was?  I have always heard good things about WIX filters, but have been using K & N in my Connie.  If the WIX is even marginally better, I'll start running those.     :stirpot:

No way in he77 will I believe that the Wix is in any way, shape, or form better than the K&N oil filter.... I've been using Wix, and/or NAPA filters on big marine diesels for many a decade and while they are indeed a good quality filter they are not the "Premium" filter that the K&N filter is.
Tony P. Crochet
(SOLD) 01 Concours Winner of COG Most Modified in 2010

Offline timsatx

  • Arena
  • Full Member
  • ***
  • Posts: 856
  • Country: 00
Re: Fricking Oil Filters
« Reply #16 on: August 23, 2011, 11:00:15 PM »
Don't forget that you can get filters from Murphs.

Offline Electroken

  • Jr. Member
  • **
  • Posts: 30
  • Country: us
Re: Fricking Oil Filters
« Reply #17 on: August 24, 2011, 04:04:13 AM »
Do the WIX filters come with the new O-rings like the K&N'S?


Yes, they do.

Offline Cholla

  • Arena
  • Full Member
  • ***
  • Posts: 363
Re: Fricking Oil Filters
« Reply #18 on: August 24, 2011, 08:32:37 AM »
K&N air filters are supposed to be premium air filters but they let in lots more dirt.
Beware the Black Widows...Feared throughout the land!

Offline T Cro ®

  • Administrator
  • Sr. Member
  • *****
  • Posts: 1743
  • Country: us
Re: Fricking Oil Filters
« Reply #19 on: August 24, 2011, 04:17:01 PM »
K&N air filters are supposed to be premium air filters but they let in lots more dirt.

This is not a debate about K&N air filters.....
Tony P. Crochet
(SOLD) 01 Concours Winner of COG Most Modified in 2010