New to the group so if this is an old subject I didn't find it. I have a 2014 c14. The Speedo and tach lights remain on after the key is off causing a slow battery draw. I have checked power ground and kipass input to the cluster. I have also researched the service manual for what activates the lights to no avail. Any help will be appreciated
Those are some pretty serious mods made (radio, cruise, who knows what else). Like others, I suspect a wiring problem. One of my mods causes the dash and everything to go INSANE if I turn the bike off while any turn signal is on or emergency flashers are on when I turn off the bike. It is some kind of back-feed issue. I haven't bothered to "fix" it (probably need a diode somewhere) since I know what not to do.
Thanks for the info. Reading the schematic and by the connector view labeling there are 3 power inputs. T10 b+ T9 ign+ T5 kipass+ 2 wires are CAN communication the rest are idiot light control circuits. I suspect it may be an internal cluster issue but it's an expensive guess.
Actually it's had the issue since I bought it a year ago and the cruise was just installed so that can't be the problem.
I just didn't bother to diagnose it until I had the fairings off to install the cruise. Thought that would be simple enough. I was wrong.
Also the previous owner installed a boss marine radio and I will disconnect it to see if that corrects the problem. Thanks again for the input