Kawasaki Concours Forum
The C-14, aka Kawasaki Concours-14, the new one :) => Accessories and modifications - C14/GTR 1400 => Topic started by: concoursnewb on July 22, 2013, 10:34:49 AM
-
I just bought an 08 C14 already lowered with both Muzzy links and Hdlbr risers. I am removing and going back to stock. Lowering links reversal is pretty straightforward I think. But I have no clue what the factory top clamp/clip on set up looks like. How much of the tube should be sticking up, if any? I have the stock bolts, etc. any pics? TIA.
-
If you just have handle bar risers, all you need is the original bolts and just bolt the antlers directly to the triple tree. If you have after market bars such Helibars Horizon ST bars you could probably find someone willing to trade. I already have the Horizon ST bars but would be happy to trade for my original antlers as the Horizon bars are worth a LOT more.
-
Here is what original antlers with risers including pull back risers look like:
(http://i897.photobucket.com/albums/ac177/sreinschmidt/C14wCCpad.jpg)
Here is what Helibars Horizon ST bars look like:
(http://www.surfsidemoto.com/mm5/graphics/00000001/HELIHST040581L.jpg)
-
Post a picture of your risers, this way we can somewhat tell who's risers are on your bike.
Or do they look like the ones in the first picture?
-
I just bought an 08 C14 already lowered with both Muzzy links and Hdlbr risers. I am removing and going back to stock. Lowering links reversal is pretty straightforward I think. But I have no clue what the factory top clamp/clip on set up looks like. How much of the tube should be sticking up, if any? I have the stock bolts, etc. any pics? TIA.
On my 08 the tubes stand proud of the top clamp by 2mm.
-
Thx gPink. I went to about 1mm above and snugged it back in.
I think I'll hang on to the Muzzy risers plates and experiment later. thx again.