Recent Posts

Pages: 1 2 3 ... 10
1
The Bike - C14/GTR 1400 / Re: Anyone know where this bolt came from?
« Last post by Boomer on Today at 05:01:59 AM »
I was confused about this as I had checked the part number on the fiches, but it seems the part number for that bolt changed between the 2008 model and the 2012.
That bolt that holds the link pipe to the frame on the 2008 it is 92153-1930, but on the 2012 is is 92153-1837, so is indeed the same as the brake caliper bolts on the later models.
2
The Bike - C14/GTR 1400 / Re: Anyone know where this bolt came from?
« Last post by Rubber_Snake on Yesterday at 11:13:31 AM »


 :thumbs: :thumbs: berna1201 :thumbs: :thumbs: :chugbeer:
3
The Bike - C14/GTR 1400 / Re: Anyone know where this bolt came from?
« Last post by denver6 on Yesterday at 10:15:52 AM »
berna1201 - thanks for the answer - that's it!! I did forget to mention I have a Delkevic exhaust. That went on probably 10 years ago. Since the Delkevic does not have the same bracket as the stock muffler, there is no need for the bolt. I must have left it in just to hold the two bushings in place - I really don't remember. The two bushings were probably also on the trailer floor, but I did recognize them as being part of the same assembly so I ignored them.

Thanks again - I feel better now  :)
4
The Bike - C14/GTR 1400 / Re: Anyone know where this bolt came from?
« Last post by berna1201 on Yesterday at 03:23:49 AM »
exhaust bolts 92153-1837
the same reference as for the front brake calipers

https://www.partzilla.com/product/kawasaki/92153-1837

 ;) ;)
5
The Bike - C14/GTR 1400 / Re: Anyone know where this bolt came from?
« Last post by Boomer on Yesterday at 02:56:40 AM »
Hi Berna,
None of those bolts have that shape head.
The suspension ones you suggest have parallel sides on the head and the exhaust one has a much wider, flatter head than the bolt he shows.
6
The Bike - C14/GTR 1400 / Re: Anyone know where this bolt came from?
« Last post by berna1201 on Yesterday at 01:47:45 AM »
Hello
7
The Bike - C10 / Re: ZG1000 in GPz900 clothing
« Last post by berna1201 on April 27, 2024, 09:41:49 PM »
it is obvious in the photo
8
The Bike - C10 / Re: ZG1000 in GPz900 clothing
« Last post by Chrome Megaphone on April 27, 2024, 08:43:54 PM »
Quote from: connie_rider on April 26, 2024, 01:48:00 PM
I went into Ebay and found some left footpegs and brackets.
Unfortunately for the $$ they want for the used parts you can almost buy the new. All shown here.

https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2499334.m570.l1313&_nkw=left+foot+peg+zg-1000&_sacat=10063

I'm picking up a crashed C-10 next month (for the engine).
If it has the left peg, I'll let you know.

Ride safe, Ted

Quote
PS: Do you still have the over bored cylinders? If it's not damaged, I might be interested.
I have the needed pistons and rods for a 1052 and have been thinking about doing this mod for years.

It was destroyed in the two affected cylinders.
9
The Bike - C14/GTR 1400 / Re: Anyone know where this bolt came from?
« Last post by berna1201 on April 26, 2024, 11:00:40 PM »
Hello
for a bolt to fall on the trailer, either the roads are really bad, or the trailer jumps a lot ;)
10
The Bike - C14/GTR 1400 / Re: Anyone know where this bolt came from?
« Last post by denver6 on April 26, 2024, 07:52:40 PM »
All good thoughts - thanks. As for jokesters, the running prank with the crew I was riding with was turning on grip heaters in summer. Plus, no one had access to the trailer or bike during the move, so I am still convinced something vibrated loose and fell to the trailer floor. I do have crash bars, I have not upgraded or replaced the stock caliper bolts.

I do agree that just because the nut fits the bolt, it does not necessarily mean they go together. It is possible that the nut vibrated off of some other bolt and this bolt vibrated loose from something else. But I am still inclined to think they do go together.

Hopefully, someone recognizes where this style of bolt is used. But like Boomer, I did not think it was used anywhere else besides the calipers. I'll keep looking. Thanks for the ideas.

Rob
Pages: 1 2 3 ... 10