« Reply #30 on: December 31, 2013, 01:04:44 PM »
I have it remounted temporarily with some strapping. After I get a new plate, I will either use strapping behind the plate or make a plate to go behind the plate. Will probably also put a rubber bumper behind the Admore to try and reduce the motion.
You can tell I wasn't in a hurry to fix it
Anyway, I did it "right" this time (which is what I should have done in the first place). I went and got some 3/4" x 1/8" flat aluminum stock and cut two pieces the height of the plate. Drilled holes in the top/bottom of each, and use that behind the plate and Admore. Everything is held together with four nylon bolts/nuts. Wow it is very strong now!
Logged
Shoodaben (was Guhl) Mountain Runner ECU flash, Canyon Cages front/rear, Helibars risers, Phil's wedges, Grip Puppies, Sargent World seat-low & heated & pod, Muzzy lowering links, Soupy's stand, Nautilus air horn, Admore lightbar, Ronnie's highway pegs, front running lights, all LED, helmet locks, RAM Xgrip, Sena SMH10, Throttle Tamer, MRA X-Creen, BearingUp Shifter, PR4-GT, Scorpion EXO-T1200,etc