Kawasaki Concours Forum
The C10, aka Kawasaki Concours - The Original => The Bike - C10 => Topic started by: nevadazx12 on May 11, 2016, 02:19:03 PM
-
I am trying to add one of those LED bulbs to my Connie. Cannot seem to get the retaining clip to attach, in fact I can't make it work at all, even without a bulb in there. Any recommendations for a replacement clip??
gg
-
Have you checked to see if the clip is bent out of shape? If one side is bent it will not line up with the retaining ring.
-
The hinge point is sloppy from the factory. I recall I crimped the sheet metal hinge knuckle with pliers 'many moons' ago. Easier, but still a PITA to retain a bulb replacement.
The wire bail is a medium spring steel. Unless you hork it up with a vice grip and pry bar, it should fit.
There is no replacement that I know of. But you might be able to bend something out of a heavy duty paper clip, *if* you have time, and *if* you have a ready supply of happy drugs.
Rick
-
(https://photos.smugmug.com/Motorcycle-Repair/Connie-C10-Headlamp/i-CMtLPbv/0/160887c7/O/headlamp1ar.jpg)
:-)